| 1. | Adhesives - designation of main failure patterns
胶粘剂.主要破损方式的名称与符号 |
| 2. | Adhesives . designation of main failure patterns
胶粘剂.主要失效型式的名称 |
| 3. | The main steam pipe ' s failure pattern is discussed and analyzed in chapter 2
第二章为主蒸汽管道失效形式分析。 |
| 4. | Research on the failure pattern and strength properties of rock under dynamic loading
岩石在动载作用下破坏模式与强度特性研究 |
| 5. | Through analyses carried out with sem , tool failure patterns under different cooling and lubricating modes were studied
借助扫描电镜的检测手段，研究了不同冷却润滑条件下刀具的失效形式。 |
| 6. | Finally , by means of utilizing this method this paper carried out analysis on the influence of failure patterns for certain micro electronic equipment
最后用此方法对某微电子装备进行了失效模式影响分析。 |
| 7. | The failure of reinforced plastic fiberglass sucker rod is classified into break and thread off , and the break of the rod body is the common failure pattern
玻璃钢抽油杆的失效类型分为断杆和脱扣两种，杆体的劈断和劈散是其最常见的失效形式。 |
| 8. | The failure pattern analysis must be conducted for the sake of reducing the risk of developing products especially the development of large scaled complex products
摘要为了降低产品研发的风险，特别是大型复杂产品的研发，必须进行失效模式分析。 |
| 9. | This article make the crack failure of the automobile axle components as the prototype of the es according to the angle of failure pattern and severity analysis
本文从失效模式及严重程度分析的角度出发，确定以汽车轴类零件的断裂失效作为系统开发的原型和起点。 |
| 10. | Based on the problem that cable - stayed bridge has many failure paths , modified / unzipping method was suggested to seek and identify major failure patterns to structural system reliability
摘要针对斜拉桥失效路径繁多的问题，采用改进的约界法限制分枝规模，寻找并识别对结构体系可靠度起主导作用的主要失效模式。 |
